The Module is a interface which is used to connect a line of conventional sounders to the GFE’s range of Addressable Fire Detection Control Panels via the detection loop. The green LED will pulse every time the unit is polled by the panel. Three LEDS are provided to indicate module status. The Yellow LED will be ON whenever there is a fault condition in the module and finally the Red LED will be ON when there is an alarm condition in the conventional zone.
This is a Wall Mounted Addressable Beacon with low power consumption. It is specifically designed to be used outdoors. Up to 32 individually addressed beacons can be installed per loop occupying address 94 to 125. The address is set using switches 1 to 5 of the 8 way DIL switch.
When individual address reporting is not required, VALKYRIE AB IP65 can be configured as a Shadow Beacon. In this case sounders do not occupy an address in the loop thus freeing up addresses for more detection devices. Shadow beacons do not report back to the control panel so their presence on the loop is not monitored. Shadow beacons draw current from the loop (3 mA in alarm) and must be included in loop load calculations.
|Minimum Order Quantity||1 Piece|
|Usage||Office Buildings, Residential Buildings, Industrial Premises|
We offer our client a comprehensive range of Smoke Detector, which can detect the smoke and cautions instantly. The small size and attractive looks make these highly adaptable to the any ambiance. Our range can be installed in almost all indoor areas, including commercial buildings and shopping malls as these are dust-proof, moisture-proof and moth-proof.
Some characteristics of our products are:
This has been designed to provide protection against short circuit faults on a GFE Analogue Addressable systems. The isolator protects the loop in the event of a short circuitby disconnecting the section of the loop where the short circuit has occurred. Whenthe fault has been rectified, the isolating circuitry reconnects the affected part of the system.